Master Steering & Suspension Service Kit

Kit Include:

27 Piece Press and Pull Sleeve Kit

Versatile Bushing Removal Tool: This pull and press sleeve kit by Orion Motor Tech provides everything you need to quickly and easily remove or install wheel bearings, bushings.
Universal Press and Pull Sleeve Kit: This complete bushing press kit includes 22 sleeves with a bore diameter ranging from 34 to 80 mm and 5 pulling shafts in the sizes of M10, M12, M14, M16, and M18, fitting a variety of wrenches and drivers.
Notched Sleeve Design: Each sleeve is designed with a notch to securely catch the edge of the bushing while allowing clear visibility of the position of the bushing you're working on.
Durable Construction: Made of premium carbon steel, this press sleeve kit provides strong and dependable long-lasting service; the pulling spindles are heat treated and blackened for superior strength and corrosion resistance.
Compact & Portable: This 27 piece bush bearing insertion tool set comes with a blow-molded storage case, keeping everything organized and easy to carry from home garage to workshop.

21 Piece Ball Joint Service Kit

Designed to Remove and Replace Press-Fit Upper and Lower Ball Joints.
Forged C-Frame Press can be used to Remove and Replace Universal Joints.
Includes all the Receiver Tubes and Removing / Installing Adapters, Universal for most Vehicles.
Solid Carbon Steel Construction with Anti-Rust Finish, Durable and Versatile.

5 Piece Front Service Kit

ALL IN ONE FRONT END SERVICE KIT: Containing 5 adjustable tools for a wide range of domestic and import vehicles. Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case.
HARDENED ALLOY CONSTRUCTION: Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs. This front end service tool kit can remove the most stubborn ball joints, tie rod ends, and pitman arms.
UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES: The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.
PROFESSIONAL PORTABLE ABS CASE: The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go. Conveniently keeps all your tools in one organized and secure place. Never miss out on a job or project from a misplaced tool.

EASY TO USE: The CVJ CV axle removal tool quickly separates the CV Joint from the axle without removing the drive shaft. Overall CV joint tool dimension:9.4"x 5.75"(23.9cm x 14.6cm); Maximum CV joint diameter: 3.7"(95mm).
ADJUST THE DIAMETER: 0.7-inch (17mm) clamping bar minimum shaft diameter; Works on CV joint shafts with 0.7-inch (17mm) or larger diameters of the groove where the rubber boot is clamped to the shaft; We recommend an 18mm or 19mm minimum shaft diameter to ensure a good bite on the shaft (Requires rings to hold on to; Not designed for use on smooth shafts).
WIDE APPLICATION: Includes 9 holes to allow full adjustment that suits different lengths of joint assemblies on most cars; Fits most vehicles equipped with constant velocity U-joints.
SAFE DESIGN: Handsfree operation of the CV joint puller tool allows you to easily release the retaining circlip; Reduces the risk of damaging the joint, transmission, or other parts; Collar ring opening accommodates axle and allows it to pass through (measure your application to ensure exact fitment)
PREMIUM MATERIAL: This CV Joint Puller is made of high-duty steel, heat-treated, sturdy and steady, corrosion resistant, wear resistant, with reliable use and long service life.

13-PIECE TIE ROD SET: Orion Motor Tech's handy mechanic tool set easily removes & installs inner tie rods without removing the rack and pinion; its 12 crowfoot adapters cover the most commonly needed SAE & metric sizes—1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 29 mm, 32.5 mm, 33.6 mm, 38.4 mm, 40 mm, & 42 mm—to get all your work done quickly and efficiently.
1/2-INCH DRIVE: Our tie rod tool is compatible with 1/2" drive wrenches and helps you get at parts where normal wrenches just can't fit; 20 inches long, its knurled grip keeps you in total control at all times.
SUPERIOR DURABILITY: Constructed from AISI 1045 medium carbon steel coated with black oxide, this tie rod removal set boasts admirable strength and will give you corrosion-proof service for years to come.
WIDE APPLICATION: Orion Motor Tech's tie rod removal tools work with most domestic and import vehicles including cars, pickups, and SUVs.
QUICK ORGANIZATION: The custom-molded case keeps your tie rod tool and adapter set organized and easy to store or transport between jobs.

DESIGN CONSIDERATIONS: Features a Heavy Duty V-threaded rod that allows for fast and precise movement with a large surface area for broad spring contact. The built-in detent pins lock the coil spring in place for safe and easy spring compression. The V-threaded rod allows for durable and smooth compression of springs both on or off the vehicle with hand or power tools. The jaws are constructed from drop forged steel with a hardened center screw for maximum strength and longevity.
APPLICATIONS: This Macpherson Strut Spring Compressor has a universal design that allows it to work with all vehicles equipped with Macpherson struts. The V-thread center screw is 5/8 inches by 11 inches long, allows for precise movement and will stay locked in place until rotational force is applied.
RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Macpherson Strut Spring Compressor, simply contact customer service for troubleshooting help, parts, replacement, or refund.